Hangar 9 1/4 Scale PA-18 Super Cub ARF 106" (HAN4540)


0,00 €
Tasse incluse
Sold by: Status: Available Soon
Quantità


PAGAMENTO SICURO CON:

Key Features

  • Functional, bungee-type suspension on main gear
  • Functional flaps
  • Folding wing struts for easy transport
  • Full-body pilot figure included
  • Functional cockpit door
  • Realistic Super Cub wheels
  • Scale, painted aluminum spinner
  • Painted fiberglass cowl with molded panel lines
  • Realistic instrument panel
  • Float-ready—hard points for mounting the Hangar 9® 1/4-scale Cub float kit (sold separately) are already built into the fuselage
  • All hardware included

Needed To Complete

Internal Combustion
  • 5+ channel Transmitter and Receiver radio system
  • 8 × standard digital servos
  • Receiver pack
  • Engine
  • Propeller
Electric Power
  • 5+ channel Transmitter and Receiver radio system
  • 7 × standard digital servos
  • Motor
  • ESC
  • Propeller
  • Motor battery

Video Overview

Overview

Back country airstrips, remote mountain lakes, alpine glider ports – wherever adventure requires wings, chances are the Piper Super Cub is there. Introduced in 1949, its rugged construction, impressive payload and marvelous short-field performance quickly made it a mainstay of the bush flying fleet. Even now, over half a century later, it remains the plane of choice for many who follow the road less traveled.

This beautiful, 1/4-scale ARF of the Super Cub has been expertly modeled in stunning detail. Almost every line and curve mirror the real thing, right down to the shape of the fillet where the fuselage meets the vertical stab. Other scale touches include functional bungee-type landing gear, a realistic instrument panel and a full-body pilot figure.

This same attention to detail has been applied to the flight performance. Like the full-scale version, the model has functional flaps that give it amazing short-field takeoff and landing abilities. It also possesses the same easy-going flight characteristics, but will eagerly perform sport aerobatics using any of the recommended power choices.

HAN4540
Nuovo prodotto

Scarica

ALLEGATO

HAN4540-Manual.pdf

Scarica (18.71M)

ALLEGATO

HAN4540_Manual_Addendum.pdf

Scarica (77.78k)
Approximate Assembly Time:15-20 Hours
Completion Level:Almost Ready-To-Fly
Control Throw (Ailerons):Low: 3/4 in (19mm) up, 9/16 in (14mm) down; High: 1 in (25mm) up, 7/8 in (21mm) down; 20-25% expo
Control Throw (Elevator):Low: 1-5/16 (33mm) up/down; High: 1-3/4 in (45mm) up/down; 20-25% expo
Control Throw (Flaps):Mid/takeoff: 1-1/8 in (29mm); Landing: 2-5/8 in (67mm)
Control Throw (Rudder):Low: 1-3/4 in (45mm) right/left; High: 2-3/8 in (60mm) right/left; 25-30% expo
Flaps:Yes
Flying Weight:16.5–18.5 lb (7.5–8.4kg)
Main Wing Tube Length:32 in (813mm)
Main Wing Tube OD:3/4 in (19mm)
Recommended Fuel:Glow
Recommended Motor Battery:8S or 9S 5000mAh Li-Po pack
Recommended Receiver Battery:2700mAh 6.0V NiMH pack
Retracts:No
Spinner Size:2.5 in painted CNC spinner (included)
Wing Loading:23.5-26.2 oz/sq ft
Wingspan:106 in (269 cm)

Registrare

Nuovo Registro conti

Hai già un account?
Entra invece O Resetta la password